• EN
  • Solutions
    • Fire protection curtains

      Fire protection curtains

      In case of fire, fire protection curtains close wall and ceiling openings. Their construction (roll-down or folding technique) and the use of different fabrics provide for a wide range of applications as well as different protection goals, classifications and time classes. The casing and guide rails of the highly flexible systems blend almost invisibly into the building and allow plenty of scope for sophisticated architecture and open room concepts.

    • Conveyor system closures

      Conveyor system closures

      Various production and logistics processes call for the most diverse types of conveyor systems. If these conveyor lines pass through fire-retardant or fire-resistant walls or ceilings, the openings required for this purpose must be provided with fire protection closures to prevent the spread of fire through the conveyor system or the goods conveyed. In the event of fire, conveyor system closures (CSC for short) must close these openings immediately and automatically. Fire resistance classified according to DIN EN 13501-2 is just as important as the smooth clearance of the closing areas in the event of a fire.

    • Smoke curtains

      Smoke curtains

      A smoke apron is a part of a smoke control system which also includes other components such as natural smoke and heat exhaust ventilators (EN 12101-2) and mechanical smoke and heat exhaust ventilators (EN 12101-3). Smoke aprons restrict the movement of combustion gases within a building in case of fire.

    • Smoke protection curtains

      Smoke protection curtains

      Once closed, smoke protection curtains (SPC) restrict the passage of smoke during the phase of fire formation, so that in the event of a fire, there is enough time to rescue people and animals from the room behind the curtain and to recover material assets without the need for respiratory equipment.

    • Tube sealings

      Tube sealings

      The solution for issues with fire protection dampers in ventilation and air conditioning systems in conveyor processes. Stöbich offers fire protection for pneumatic conveyor lines the closing elements of which are not exposed to the flow of conveyed material. This way, the closing element cannot be damaged or contaminated by abrasive conveyed goods.

    • Control units

      Control units

      Each automatic fire protection system needs a control unit. They are critical to safety, because a failure of this function means that the entire investment into a fire protection sealing has been in vain. Control units coordinate both fire detection and interaction with other control units, such as higher-level building control systems or clearing of the closing area of conveyor system closures.

  • Theme worlds
  • News
  • Contact
  • STÖBICH Brandschutz: Austria Contact
Product - Stripecoil

Stripecoil

The passable but still floor-closing smoke apron

Product description

The passable and floor-closing smoke apron. Stripecoil is the optimum smoke protection for foot traffic areas and escape routes - designed for the temperature class according to DIN EN 12101 to D120 (heat resistance over 120 minutes at a test temperature of max. 600°C) and DH30 (heat resistance over 30 minutes at test temperature according to the unit temperature curve. A width of only 3 m is sufficient to allow about 200 people ( including prams and wheelchairs) to pass through the passage per minute. A soft and yielding closing edge of the individual fabric strips helps to minimize the risk of injury. The smoke barrier closes without external energy thanks to the "Gravigen" drive system.

Stripecoil

Type

Textile smoke apron

Proof of usability

CE according to DIN EN 12101-1

Fabric

Modutex 600 A2

Verification

Z - 56. 429 - 916 • 0761-CPD-0060

Closing direction

From top to bottom

Closing cycles

1,000 cycles according to DIN EN 12101-1

Classification

DH 30 • D 120 • Classification according to DIN EN 12101-1

Triggering

Approved hold-open system • To be provided on site

Downloads

Two winding shafts One winding shaft
Constructive system design - Two winding shafts

1 Smoke detector 2 Casing 3 Side guide 4 Fixing bracket 5 Fabric 6 Closing element 7 Tubular motor 8 Control module 9 Control with operating unit 10 Manual release


1 Smoke detector 2 Casing 3 Side guide 4 Fixing bracket 5 Fabric 6 Closing element 7 Tubular motor 8 Control module 9 Control with operating unit 10 Manual release

Fabric

System width

Drop length

t

h

Modutex 600 A2

> 1.4 m - ≤ 2.7 m

≤ 3.5 m

330 mm

270 mm

Modutex 600 A2

> 2.7 m - ≤ 15 m

≤ 3.5 m

330 mm

200 mm
Constructive system design - One winding shaft

1 Smoke detector 2 Casing 3 Side guide 4 Fixing bracket 5 Fabric 6 Closing element 7 Tubular motor 8 Control module 9 Control with operating unit 10 Manual release


1 Smoke detector 2 Casing 3 Side guide 4 Fixing bracket 5 Fabric 6 Closing element 7 Tubular motor 8 Control module 9 Control with operating unit 10 Manual release

Fabric

System width

Drop length

t

h

Modutex 600 A2

> 1 m - ≤ 1.8 m

≤ 3.5 m

190 mm

290 mm

Modutex 600 A2

> 1.8 m - ≤ 6 m

≤ 3.5 m

190 mm

225 mm

Closing strips

Standard

Flexible closing strip

Closing strips - Flexible closing strip

more... less...

Casing

Standard

Multi-coil for wall mounting

Casing - Multi-coil for wall mounting

Multi-coil for ceiling (270)

Casing - Multi-coil for ceiling (270)

SB ≤ 2,7 m

Multi-coil for ceiling (200)

Casing - Multi-coil for ceiling (200)

SB > 2,7 m

Single-coil for wall mounting

Casing - Single-coil for wall mounting

Single-coil for ceiling mounting

Casing - Single-coil for ceiling mounting
more... less...

Casing installation options

Ceiling mounting

Wall mounting (special purpose)

Guide rails

Standard

Standard

Guide rails - Standard

Lateral doubling

Guide rails - Lateral doubling
more... less...

References

Product - Fashion Store, Bertrange Luxemburg

Fashion Store, Bertrange Luxemburg

Read more
Contact Share on Facebook Share on Linkedin Share by E-Mail Copy URL Start Tour