EN
Solutions
- Fire protection curtains
  
  Fire protection curtains
  
  In case of fire, fire protection curtains close wall and ceiling openings. Their construction (roll-down or folding technique) and the use of different fabrics provide for a wide range of applications as well as different protection goals, classifications and time classes. The casing and guide rails of the highly flexible systems blend almost invisibly into the building and allow plenty of scope for sophisticated architecture and open room concepts.
- Conveyor system closures
  
  Conveyor system closures
  
  Various production and logistics processes call for the most diverse types of conveyor systems. If these conveyor lines pass through fire-retardant or fire-resistant walls or ceilings, the openings required for this purpose must be provided with fire protection closures to prevent the spread of fire through the conveyor system or the goods conveyed. In the event of fire, conveyor system closures (CSC for short) must close these openings immediately and automatically. Fire resistance classified according to DIN EN 13501-2 is just as important as the smooth clearance of the closing areas in the event of a fire.
  - ECClos®-S
  - ECClos®-Q
  - ECClos®-FLEX
  - ECClos®-D
  - ECClos®-K
  - Universal-B
  - Omnicompact
  - Universal-S
  - ECClos®-FLEX-S
  - Collar
  - Turbocoil
  - GCC
  - RGT
- Smoke curtains
  
  Smoke curtains
  
  A smoke apron is a part of a smoke control system which also includes other components such as natural smoke and heat exhaust ventilators (EN 12101-2) and mechanical smoke and heat exhaust ventilators (EN 12101-3). Smoke aprons restrict the movement of combustion gases within a building in case of fire.
- Smoke protection curtains
  
  Smoke protection curtains
  
  Once closed, smoke protection curtains (SPC) restrict the passage of smoke during the phase of fire formation, so that in the event of a fire, there is enough time to rescue people and animals from the room behind the curtain and to recover material assets without the need for respiratory equipment.
  - Fiberseal
  - Fiberseal-H
- Tube sealings
  
  Tube sealings
  
  The solution for issues with fire protection dampers in ventilation and air conditioning systems in conveyor processes. Stöbich offers fire protection for pneumatic conveyor lines the closing elements of which are not exposed to the flow of conveyed material. This way, the closing element cannot be damaged or contaminated by abrasive conveyed goods.
  - Ecotube
  - Omnitube
- Control units
  
  Control units
  
  Each automatic fire protection system needs a control unit. They are critical to safety, because a failure of this function means that the entire investment into a fire protection sealing has been in vain. Control units coordinate both fire detection and interaction with other control units, such as higher-level building control systems or clearing of the closing area of conveyor system closures.
  - RZ7
  - RZ3/4
  - RZ8
  - Battery system
  - Movipower 350/550
  - UPS
Theme worlds
News
Contact
STÖBICH Brandschutz: Austria Contact

Girls' and Boys' Day 2022

Girls’ and Boys’ Day 2022

The nationwide action day for stereotype-free career orientation for boys and girls took place on 28 April 2022. At STÖBICH, too, interested kids had the chance to take a look and learn about the various apprenticeship professions in preventive fire protection.

10 pupils from the 5th-8th grade dropped by the training workshop at the central STÖBICH site in Goslar last Thursday. After the official welcome by the instructor, they went on a tour of the fire protection company. With the active support of the STÖBICH trainees, the children were then allowed to try their hand at various stations: They marked workpieces on the centre punch, worked at the soldering station, assembled a tentacle robot and built a relay circuit. The crowning glory of the day was the joint lunch and the subsequent fire test on the outdoor grounds. The participating girls and boys were enthusiastic, and the trainees also had fun.

At STÖBICH, individual as well as series solutions are developed, manufactured and installed worldwide. In total, training is provided in four different professions:

- Industrial clerks (m/f/d)
- Technical product designers (m/f/d)
- Construction mechanic (m/f/d)
- Mechatronics technician (m/f/d)

There are still apprenticeship places available for this year. If you want to get started with the world market leader, you can apply here: recruiting@stoebich.com

Contact Share on Facebook Share on Linkedin Share by E-Mail Copy URL Start Tour