Product description
Ideal for efficient fire protection of large dimensions: The textile fire protection curtain Fibershield-P is approved for widths up to 10 m and drop lengths of up to 7.6 m. Larger dimensions are technically feasible. Different classifications can be achieved flexibly by using different types of fabric. The curtain can be moved with just one drive system. As standard, Fibershield-P is equipped with the tried and tested "Gravigen" drive, which closes without requiring an external power source. With numerous design variants, Fibershield-P offers plenty of scope for customer-specific solutions.
|
Type |
Textile fire protection curtain |
|
Achievable protection goals |
EI - with fire load free zone • EI - with sprinklers |
|
Proof of usability |
General technical approval (Z-6.60-2127) |
|
Fabric |
Heliotex • Protex 1100.1 A2 |
|
Fire load free zone |
Heliotex: EI 30/60/90min 20/30/50 cm • Protex: EI 30/60/90min 100/150/200 cm |
|
Verification |
Z-6.60-2127 • UB III/B-07-010-1 • LP-1216.2/02 • UB III/08-033 • UB III/B-04-045 • UB 3.1/ 09-018 • UB 3.3/09-202 • UU IV/00-39-1 • 08/32309876 • 2011-Efectis-R0495 • UL 10 (b) (2009) • UL 10 (c) (2009) • UL 10 (d) (2009) • NFPA 252 (2012) |
|
Closing direction |
From top to bottom |
|
Fire resistance |
E 30 • E 60 • E 90 • E 120 • EW 30 • EW 60 • EW 90 • EW 120 • classified according to DIN EN 13501-2 |
|
Closing cycles |
C2 |
1 Smoke detector 2 Casing 3 Side guide 4 Fixing bracket 5 Fabric 6 Closing element 7 Tubular motor 8 Control module 9 Control with operating unit 10 Manual release
1 Smoke detector
2 Casing
3 Side guide
4 Fixing bracket
5 Fabric
6 Closing element
7 Tubular motor
8 Control module
9 Control with operating unit
10 Manual release
|
Classification |
Fabric |
System width |
Drop length (AL) |
t (mm) |
h (mm) |
|---|---|---|---|---|---|
|
EW 90 |
Heliotex EW |
≥ 0.8 m - ≤ 10 m |
≤ 2 m |
190 |
250 |
|
EW 90 |
Heliotex EW |
≥ 0.8 m - ≤ 10 m |
≤ 6 m |
235 |
290 |
|
E 90 / EW 30 |
Protex 1100.1 A2 |
≥ 0.8 m - ≤ 1.6 m |
≤ 3.5 m |
190 |
250 |
|
E 90 / EW 30 |
Protex 1100.1 A2 |
≥ 1.6 m - ≤ 10 m |
≤ 3.5 m |
190 |
200 |
|
E 90 / EW 30 |
Protex 1100.1 A2 |
≥ 0.8 m - ≤ 10 m |
≥ 3.5 m - ≤ 6 m |
190 |
250 |
|
E 90 / EW 30 |
Protex 1100.1 A2 |
≥ 0.8 m - ≤ 10 m |
≥ 6 m - ≤ 7.6 m |
235 |
290 |
Special sizes on request - technically feasible up to dimensions 22 x 9m (Protex 1100.1 A2) or 12 x 6 m (Heliotex)
Closing strips
Standard
Standard
Type 4,6
Special
Spring-loaded closing strip
Type 3,84 F (Special)
Spring-loaded closing strip
Type 4,6 F (Special)
Guide rails
Standard
Type 105 E (niche)
a 105 mm b 74 mm AL ≤ 6 m A ≤ 50 m²
Type 105 E (embrasure)
a 105 mm b 74 mm AL ≤ 6 m A ≤ 50 m²
Type 105 E(Wall)
a 105 mm b 74 mm AL ≤ 6 m A ≤ 50 m²
Type 80 E
a 80 mm b 74 mm AL ≤ 3,5 m A ≤ 18 m²
Type 160 E
a 160 mm b 100 mm AL ≤ 9 m A ≤ 120 m²
References
