• EN
  • Solutions
    • Fire protection curtains

      Fire protection curtains

      In case of fire, fire protection curtains close wall and ceiling openings. Their construction (roll-down or folding technique) and the use of different fabrics provide for a wide range of applications as well as different protection goals, classifications and time classes. The casing and guide rails of the highly flexible systems blend almost invisibly into the building and allow plenty of scope for sophisticated architecture and open room concepts.

    • Conveyor system closures

      Conveyor system closures

      Various production and logistics processes call for the most diverse types of conveyor systems. If these conveyor lines pass through fire-retardant or fire-resistant walls or ceilings, the openings required for this purpose must be provided with fire protection closures to prevent the spread of fire through the conveyor system or the goods conveyed. In the event of fire, conveyor system closures (CSC for short) must close these openings immediately and automatically. Fire resistance classified according to DIN EN 13501-2 is just as important as the smooth clearance of the closing areas in the event of a fire.

    • Smoke curtains

      Smoke curtains

      A smoke apron is a part of a smoke control system which also includes other components such as natural smoke and heat exhaust ventilators (EN 12101-2) and mechanical smoke and heat exhaust ventilators (EN 12101-3). Smoke aprons restrict the movement of combustion gases within a building in case of fire.

    • Smoke protection curtains

      Smoke protection curtains

      Once closed, smoke protection curtains (SPC) restrict the passage of smoke during the phase of fire formation, so that in the event of a fire, there is enough time to rescue people and animals from the room behind the curtain and to recover material assets without the need for respiratory equipment.

    • Tube sealings

      Tube sealings

      The solution for issues with fire protection dampers in ventilation and air conditioning systems in conveyor processes. Stöbich offers fire protection for pneumatic conveyor lines the closing elements of which are not exposed to the flow of conveyed material. This way, the closing element cannot be damaged or contaminated by abrasive conveyed goods.

    • Control units

      Control units

      Each automatic fire protection system needs a control unit. They are critical to safety, because a failure of this function means that the entire investment into a fire protection sealing has been in vain. Control units coordinate both fire detection and interaction with other control units, such as higher-level building control systems or clearing of the closing area of conveyor system closures.

  • Theme worlds
  • News
  • Contact
  • STÖBICH Brandschutz: Austria Contact

System: StrainLock

StrainLock

Product description

In the event of an accident, lithium-ion batteries generate pressure surges that can be accompanied by explosions. The resulting gases are highly toxic. The hazard scenario has therefore changed fundamentally compared to the previous hazardous goods storage solutions: The fire hazard no longer acts on the cabinet from the outside, it acts from the inside and is accompanied by flames, explosions and toxic gases.

The StrainLock is the solution for the safe storage of lithium-ion batteries. The new development for this special hazard scenario has a filter system that retains toxic gases and dusts as well as sparks and flames.

The integrated thermal management prevents a critical temperature of the outer walls. Should a battery inside the StrainLock have an accident, the safety measures taken prevent the spread of fire and contamination of the surrounding area.

Main features

Also for critical and defective lithium-ion batteries
Integrated gas filter system
Mechanical resistance
Tested overall system
No escape of sparks and flames
No leakage of liquids and solids
The circuit of each compartment has a separate fuse
Safe and sturdy locking mechanism
Durable construction
Protection of persons and property
The drawers close individually in the event of an accident

Downloads

Technical dataStrainLock F (standard)StrainLock F-S-E "Charge"
Outer dimensions La x Wa x Ha718 x 692 x 1,966 mm718 x 692 x 1,966 mm
Shelf dimensions L x W x H574 x 535 x 258 mm574 x 530 x 250 mm
Empty weight approx.388 kg425 kg
Carrying capacity5 x 50 kg5 x 30 kg
max. energy content5 x 2.5 kWh5 x 2.5 kWh
StrainLock

Description of components

Gas control system
Socket strips (optional)
Flame spread inhibiting shelves
Stable locking
Pull-out drawers (optional)
Cable entry (optional)
Integrated filter system
Height adjustment of the stand
Under-run stand

Options

Colour selectable
E: Socket strips
(only in conjunction with pull-out drawers)
S: pull-out drawers
K: individually assignable cable entry

Enquiries about the StrainLock

     SEND
Contact Share on Facebook Share on Linkedin Share by E-Mail Copy URL Start Tour